# Pack a logic analyzer.

Kit 16 Instruments Open source

Sixteen channels on one USB-C cable, for a laptop or a Raspberry Pi. It is open source: the board, the FPGA design, the firmware and the software are all published.

- **200 MS/s** on all 16 channels, measured on the first boards
- **85 MHz** clocks captured whole, on each of the 16 inputs

[See the kit $99](https://nearfieldsupply.com/boards/logic-boole-16/) [Read the design on GitHub](https://github.com/mgwalkerjr95/logic-boole-16)

![The Logic Boole 16 board: two keyed pod connectors at the front, the FPGA in the middle, USB-C on the right and a 40-pin header at the back.](https://nearfieldsupply.com/img/lb16/hero.webp)

*Logic Boole 16, revision C. A render of the design.*

### Measured on real boards

The figures that sell a board, such as its speed and its timing, are measured on built boards, and the page says how.

### Packed and checked

Each kit lists what is in the box and what is not. Each board passes its test before it ships.

### Open where it counts

Boards marked open hardware come with their design files, firmware and software, so you can read them and change them.

## Find your kit

*Start from what you need to do*

The field guide tells you what is wrong with a board. The kit is what you reach for next.

Each kit is one board with what it needs to work on your bench: a datasheet with measured figures, a quick start guide, and software you can script.

1. See what a bus or a signal is doing → Instruments
2. Power a board and measure what it draws → Power
3. Freeze something that moves → Light
4. Know when someone is in the room → Sensing

## The kits

*Two boards, both built*

- [Logic Boole 16](https://nearfieldsupply.com/boards/logic-boole-16/): Kit 16 Instruments · A 16-channel logic analyzer on USB 3, for a computer or a Raspberry Pi. · **200 MS/s** on all 16 channels, measured on the first boards · $99 ~~$149~~ Not on sale yet
- [LED Strobe](https://nearfieldsupply.com/boards/led-strobe/): Kit 72 Light · Three trimmers set the rate, the flash length and the brightness, or a logic pin fires each flash. · **1–1,000 Hz** flash rate, each flash from 5 µs to 127 ms long · Not on sale yet

## Open hardware

*Read it, change it, build your own*

- Open hardware: CERN-OHL-S v2

### Logic Boole 16 is published in full.

The KiCad project and the files the boards were made from, the FPGA design, the firmware's source and the host software are in one repository.

[View on GitHub](https://github.com/mgwalkerjr95/logic-boole-16)

## From the field guide

*Near Field Notes: the notes behind the boards*

[Note 37 · Power · What do a chip fuse, a polyfuse and an eFuse do when a USB port shorts? · Read before you power a board from a laptop.](https://nearfieldnotes.com/notes/fuses/)

[Note 13 · Power · Which kind of capacitor should feed a load? · Six parts that store charge, each running the same load.](https://nearfieldnotes.com/notes/capacitor-types/)

[Note 47 · History · Who invented USB-C? · The connector every kit here plugs into.](https://nearfieldnotes.com/notes/who-invented-usb-c/)

---

Source: https://nearfieldsupply.com/
